April '02 Meeting Pics

---

Back to Meeting Index | Home | <Prev | Next>

Photos courtesy of Jeff Sampson
Click thumbnails for a larger view.

Bruce Shapiro was running his mill that cuts foam blocks.	Here is the mill in action.	A face.	A sea shell.
The same shell cut out of aluminum. I assume it was done on a bigger machine.	A guy with a guitar cut out of wood.	A collection of finished foam blocks.	Bruce made this kinetic sculpture of a girl on a snow board.
Front view. You can see the counter balance. The girl is cut from 1/2 inch thick steel plate.	Every snowboard should have a laser bolted on the front.	Bruce has his own computer controlled Etch-A-Sketch. These are stepper motors.	Kenneth Kern is playing with Ben Johnson's new laptop computer.
Jeff Hove gave this mechanical thing a new home.	Kenneth Kern made this R/C car. The frame is completely built from scratch.	This roller coaster was in the room.	Bruce had these pneumatic cylinders. They are controlled from a computer.
Bruce had this big CO2 laser.	Bill Arden is packing it up to take home.